Difference between revisions of "Hacking hardware for chumby"

From Chumby Wiki
Jump to: navigation, search
(added datasheet for the chips of interest)
(specs for the accel.)
Line 14: Line 14:
 
* Built-in microphone
 
* Built-in microphone
 
* "Bend" switch
 
* "Bend" switch
* Kionix KXP74-1050 3-axis accelerometer [http://www.kionix.com/Product%20Sheets/KXP74%20Series.pdf Datasheet]
+
* Kionix KXP74-1050 3-axis accelerometer [http://www.kionix.com/Product%20Sheets/KXP74%20Series.pdf Datasheet] [www.kionix.com/Product-Specs/KXP74-1050%20Specifications%20Rev%204.pdf Specifications]
 
* STMicroelectronics STR711FR0/1 ARM7 "crypto" processor [http://www.st.com/stonline/books/pdf/docs/10350.pdf Datasheet]
 
* STMicroelectronics STR711FR0/1 ARM7 "crypto" processor [http://www.st.com/stonline/books/pdf/docs/10350.pdf Datasheet]
 
* Soft-switch on power, controlled by crypto processor
 
* Soft-switch on power, controlled by crypto processor

Revision as of 00:29, 6 August 2007

Note - this page is for hacking of "Ironforge" production hardware.
For information about alpha prototypes, please see Hacking hardware for Foo/Katamari.

What's in a chumby?

  • 350MHz Freescale iMX21 MC94MX21DVKN3 ARM9 controller Datasheet Technical Information
  • Samsung 64MB SDRAM on 32-bit data path
  • Hynix HY27US 64MB NAND Flash ROM
  • Three USB 2.0 full speed ports, one internal, two external
  • Xterasys 3135G 802.11g USB Wifi adapter (ralink chipset)
  • DataImage 320hx240v TFT display with touchscreen
  • Texas Instruments TSC2110 Programmable Touchscreen Controller with Stereo DAC
  • 2W stereo speakers, with headphone jack
  • Built-in microphone
  • "Bend" switch
  • Kionix KXP74-1050 3-axis accelerometer Datasheet [www.kionix.com/Product-Specs/KXP74-1050%20Specifications%20Rev%204.pdf Specifications]
  • STMicroelectronics STR711FR0/1 ARM7 "crypto" processor Datasheet
  • Soft-switch on power, controlled by crypto processor
  • TTL serial port @38400 8N1

Power requirements

The chumby uses a very standard 2.1mm I.D. x 5.5mm O.D. x 9.5mm Female (P-5) barrel connector and runs off 1A at anywhere between 6.5 VDC and 14.5 VDC.
It ships with a "wallwart" power supply with US-style prongs, however, it's pretty easy to find a compatible power supply with other form factors.