Difference between revisions of "Hacking hardware for chumby"
From Chumby Wiki
(→Power requirements) |
(added datasheet for the chips of interest) |
||
Line 4: | Line 4: | ||
=What's in a chumby?= | =What's in a chumby?= | ||
− | * 350MHz Freescale iMX21 MC94MX21DVKN3 ARM9 controller | + | * 350MHz Freescale iMX21 MC94MX21DVKN3 ARM9 controller [http://www.freescale.com/files/32bit/doc/data_sheet/MC94MX21.pdf?fpsp=1 Datasheet] [http://www.freescale.com/files/32bit/doc/data_sheet/MC9328MX21.pdf?fpsp=1 Technical Information] |
* Samsung 64MB SDRAM on 32-bit data path | * Samsung 64MB SDRAM on 32-bit data path | ||
* Hynix HY27US 64MB NAND Flash ROM | * Hynix HY27US 64MB NAND Flash ROM | ||
Line 14: | Line 14: | ||
* Built-in microphone | * Built-in microphone | ||
* "Bend" switch | * "Bend" switch | ||
− | * Kionix KXP74-1050 3-axis accelerometer | + | * Kionix KXP74-1050 3-axis accelerometer [http://www.kionix.com/Product%20Sheets/KXP74%20Series.pdf Datasheet] |
− | * STMicroelectronics STR711FR0/1 ARM7 "crypto" processor | + | * STMicroelectronics STR711FR0/1 ARM7 "crypto" processor [http://www.st.com/stonline/books/pdf/docs/10350.pdf Datasheet] |
* Soft-switch on power, controlled by crypto processor | * Soft-switch on power, controlled by crypto processor | ||
* TTL serial port @38400 8N1 | * TTL serial port @38400 8N1 |
Revision as of 23:32, 5 August 2007
Note - this page is for hacking of "Ironforge" production hardware.
For information about alpha prototypes, please see Hacking hardware for Foo/Katamari.
What's in a chumby?
- 350MHz Freescale iMX21 MC94MX21DVKN3 ARM9 controller Datasheet Technical Information
- Samsung 64MB SDRAM on 32-bit data path
- Hynix HY27US 64MB NAND Flash ROM
- Three USB 2.0 full speed ports, one internal, two external
- Xterasys 3135G 802.11g USB Wifi adapter (ralink chipset)
- DataImage 320hx240v TFT display with touchscreen
- Texas Instruments TSC2110 Programmable Touchscreen Controller with Stereo DAC
- 2W stereo speakers, with headphone jack
- Built-in microphone
- "Bend" switch
- Kionix KXP74-1050 3-axis accelerometer Datasheet
- STMicroelectronics STR711FR0/1 ARM7 "crypto" processor Datasheet
- Soft-switch on power, controlled by crypto processor
- TTL serial port @38400 8N1
Power requirements
The chumby uses a very standard 2.1mm I.D. x 5.5mm O.D. x 9.5mm Female (P-5) barrel connector and runs off 1A at anywhere between 6.5 VDC and 14.5 VDC.
It ships with a "wallwart" power supply with US-style prongs, however, it's pretty easy to find a compatible power supply with other form factors.