Chumby One tips and tricks
From Chumby Wiki
A crib sheet of useful commands.
Local boot scripts
Scripts in /psp/rfs1/userhook0, /psp/rfs1/userhook1, /psp/rfs1/userhook2 get run on boot and are stored locally (no USB dongle needed). userhook2 is run just before the control panel is downloaded, and is the typical place to interject commands. Earlier hooks are provided in case you need to muck with drivers, paths, etc.
Note: This information is also valid for Chumby Classics (at least on latest beta version)
Making a swap partition
if [ ! -e /mnt/storage/swap ] then echo "Making 256M swapfile" dd if=/dev/zero of=/mnt/storage/swap bs=1M count=256 mkswap /mnt/storage/swap fi swapon /mnt/storage/swap
Loading .so's without modifying the base install
chumby:/mnt/storage# echo $LD_LIBRARY_PATH /lib:/lib:/usr/lib:/usr/local/lib:/mnt/storage/lib:/mnt/storage/local/lib
Put the libraries in /mnt/storage/lib or /mnt/storage/local/lib.